LIFT AMBARCATIUNE BASTA BOATLIFTS - GALVANIZED STEEL - 8165 KG / 180 CM
Lift
Capacity 8165 kg
Lifting
Range 180 cm
Minimum
Water Depth 84 cm
Frame
Material Galvanized Steel
Frame
Length 566 cm
Frame
Width 373 cm
Frame
Weight 1704 kg
No. of
legs needed 6 (2.5”)
Bunk
Length 615 cm
No. of
bunks 9
Shipping
Weight 1852 kg
No. of
Hydraulic Cylinders 4
Standard
Leg Length 122 cm
Standard
Hose Length 69 cm
Mono-Crystal
Solar Charger 12 Watt
Remote
Control Transmitters 2
The 18K boat lift is Heavy Duty, yet easy to assemble. This 18000lb. capacity galvanized steel lift is able to raise a twin-engine Pursuit Yacht like a breeze! Steel has
less flex and is stable against wakes and waves. The rigid properties
are preferred for Class 2 and Class 3 sized boats, and it is also ideal
for deep-water sites. No latches, cables or levers are needed to secure the
raised lift. Basta Boatlifts’ patented Over-Center™ gravity locking design with
Balanced Load™ H-frame technology uses gravity to hold the raised lift in place
without the possibility of drifting down. No Weld
Cylinders Delrin®
Bushings Delrin®
Bushings allow pivot points to be tighter and operate more smoothly. High
strength polymer construction eliminates metal-to-metal contact reducing
electrolysis, extending the life of the boat lift. No weld cylinders! Basta Boatlifts uses cylinders made
from corrosion resistant aluminum and have no welds. Eliminating welds
increases strength and reduces the possibility of corrosion.
Stainless
steel cylinder fittings & hose ends
Duplex-bonded
synthetic hydraulic hoses
Time-tested
full length rotating bunks to protect your hull
Stainless
steel hardware
Hydraulic
power pack housed in a strong and attractive white fiberglass dock
box with stainless steel hardware and lockable lid
Spartan
Power battery cables
Two
wireless remote control key fobs
Manual
control switches in power box
12
Watt solar panel securely mounted on top of the fiberglass box. Can be
remotely installed or used with a simple “float” charger
Hydraulics
that use a special long-life, environmentally friendly fluid
Lifturi
HILL HOLDER FOOT PAD GALVANIZED STEEL FOR BASTA BOATLIFTS
157,02€
PONTOON KIT 10K GALVANIZED STEEL FOR BASTA BOATLIFTS
3107,43€
DEEP WATER LEGS GALVANIZED STEEL 4,9 M FOR BASTA BOATLIFTS (2'')
487,60€
TRITOON KIT 10K GALVANIZED STEEL FOR BASTA BOATLIFTS
3586,77€
DEEP WATER SILL BRACE KIT GALVANIZED STEEL FOR BASTA BOATLIFTS (10K78)
1528,92€
LIFT AMBARCATIUNE BASTA BOATLIFTS - GALVANIZED STEEL - 16329 KG / 152 CM
85586,77€
LIFT AMBARCATIUNE BASTA BOATLIFTS - HYDRAULIC - ALUMINUM - 3538 KG / 142 CM
16413,21€
LIFT AMBARCATIUNE BASTA BOATLIFTS - GALVANIZED STEEL - 4536 KG / 165 CM